The system identifies
Readings are compared with limits and criteria configured within the package's enabled features.
Monitoring
Follow your vessel's data
Your team reviews indicators, history and alerts from enabled features. Internet is required to use the package and keep remote monitoring current. Monitoring only, without equipment actuation.
From readings to monitoring
The system informs. Your team assesses.
Your team checks
Authorized users review context, sources and data timestamps before assessing the incident.
The incident is recorded
Acknowledgement records awareness in the software. Any physical intervention is performed by the vessel's crew under its procedures.
What your team reviews
Alerts with context and history
Readings, limits, sources and timestamps help explain each incident. The remote view uses synchronized data; during a connection outage, it stops receiving new readings.
Vessel Tech · Monitoring display
Demo vessel
Observed mode: In transitInternet connected
OverviewTanksConsumptionRouteAlerts
Discrepancy alerts
Continuous mass balance and integrity checks, with an audit trail
Active · 4History 24 h
Alarm12:51
Mass balance: −0.62 m³ in 24 h (limit 0.50 m³)
Warning11:58
Flow meter × ECM of MCA BB: 5.9 % difference
Warning11:20
MCP BE: specific consumption +4.0% above baseline
Info10:05
Speed suggestion available: 8.7 kn
AlarmMass balance · since 09:40
since 12:51−0.62m³ · 24 h
Expected inventory
312.95 m³
Measured inventory
312.33 m³
Difference
−0.62 m³
Limits in force
- Mass balance — 0.50 m³ in 24 h
- Bunkering: delivery note × tanks — 0.5 %
- Specific consumption × baseline — 3 %
Probable source
Tank No.2 Wing BB lost 0.48 m³ since 09:40 with no transfer recorded. Transfer pumps stopped and cross-over valves closed.
Recommended actions
- 1.Manual sounding of tank No.2 Wing BB
- 2.Check drain and cross-over valves
- 3.Record the result in the event
Acknowledge alert
Software acknowledgement; no changes to alarms or equipment.
PLC online · read every 1 sPortal sync: queue empty
Demonstration — fictitious data and features subject to the contracted package
An incident tracked through data
- 09:40
Unexplained drop
A storage tank level starts to drop with no transfer recorded.
- 12:51
Alert on board
The mass balance exceeds the limit and the alert appears on the HMI, with the probable source.
- 12:58
Team checks
The responsible team reviews current data and assesses the observed discrepancy.
- 14:40
Sounding confirms
The crew takes a manual sounding, records the result and checks drains and valves.
- 15:10
Result recorded
The team records the investigation result in the history. Vessel Tech does not carry out equipment corrections.
Monitoring conditions
Active connection
Remote updates depend on connectivity and synchronization. Always check the reading's timestamp and quality.
Connection interrupted
New readings stop reaching the portal. The last update must be identified; available history is not a current reading.
Alert acknowledgement
Acknowledgement does not remove the cause, silence physical alarms or change equipment. Follow-up is documented in the software.
